JDP have created a guide that will help people achieve compliance with the general binding rules for sewage systems.
All septic tanks in England and Wales that discharge into a watercourse or a ditch will need to be replaced by 1 January 2020, because of a direct result of new rules that have been introduced to address the concerns that waste water is polluting watercourses.
With less than a year to go, it is estimated that an incredible 60% of sites do not currently meet the requirements of the new legislation.
If you currently own a non-compliant septic tank, you have two options available to you in order to comply with these new rules before the deadline (unless you live in Scotland or Ireland, as different rules apply to you).
You can keep your existing septic tank system, but discharge the waste into a drainage field instead of the watercourse. Things to bear in mind when considering this option is that a drainage field needs to be:
If you choose to install a new drainage field, it must comply with BS 6297:2007. In addition, if the new drainage field is going to be in or near a designated sensitive area, you will need to apply for a permit from the Environment Agency. If you’re not sure if you need a permit, the Agency will be able to tell you.
If installing a drainage field isn’t practical, you can opt to replace your septic tank with a small sewage treatment plant instead.
Any new small sewage treatment plant must have full BS EN 12566-3 certification, but the new rules still allow for wastewater from a plant to be discharged into a watercourse, as the sewage undergoes further treatment.
Anyone considering this option needs to remember that small sewage treatment plants either need a power supply that cannot be interrupted, or can operate without power for up to six hours.
If you’re one of the 60% who needs to change their sewage system and the choice seems a little daunting, don’t worry. There’s still time before the deadline, and a company like JDP can help.
With over 45 years of expertise in drainage and water management, and a huge range of both septic tanks and treatment plants available, it can talk through the benefits of both types of system and offer you free advice tailored to your individual needs.
One last thing to bear in mind is that, whether you install a new drainage field or replace your septic tank, the new rules also require you to make sure your system is maintained properly and does not cause pollution.
This might seem like common sense, but there are a number of things you need to be aware of, so we’ve created a guide to help you comply with the general binding rules for sewage systems.
This article sees Russell Dean, Residential Product Group Director at Mitsubishi Electric, reflect on last week’s King’s Speech…
Posted in Articles, Building Industry News, Building Products & Structures, Building Services, Facility Management & Building Services, Health & Safety, Heating Systems, Controls and Management, Heating, Ventilation and Air Conditioning - HVAC, news, Plumbing, Posts, Retrofit & Renovation, Sustainability & Energy EfficiencyVortice is proud to unveil its latest range of DMEV (decentralised mechanical extract ventilation) fans, offering a vital remedy for condensation and mould challenges faced by UK social housing providers.
Posted in Air Conditioning, Articles, Building Industry News, Building Products & Structures, Building Services, Damp & Waterproofing, Facility Management & Building Services, Heating, Ventilation and Air Conditioning - HVAC, Innovations & New Products, Retrofit & RenovationOn 13th and 14th June, The Encon Group, the number one independent distributor of building materials, gathered industry professionals at its first Passive Fire Protection Showcase.
Posted in Articles, Building Industry Events, Building Industry News, Building Products & Structures, Building Services, Exhibitions and Conferences, Facility Management & Building Services, Health & Safety, Insulation, Retrofit & Renovation, Security and Fire Protection, Seminars, Training, WallsTwo new visual technical guides from Glidevale Protect have been released to help specifiers and roofing contractors determine the correct roof space ventilation requirements depending on the type of pitched roofing underlay used.
Posted in Articles, Building Industry News, Building Products & Structures, Building Regulations & Accreditations, Building Services, Damp & Waterproofing, Facility Management & Building Services, Heating, Ventilation and Air Conditioning - HVAC, Innovations & New Products, Membranes, Posts, Publications, Restoration & Refurbishment, Retrofit & Renovation, Roofs, Ventilation