Wondering what the best glass solution is for security? Here, Glazing Vision discusses the benefits of laminated glass for safety and security.
Bonding two panes of glass with an interlayer produces laminated glass, a catch-all term to cover the various combinations of glass and interlayer. Because the interlayer holds the glass even when broken, laminated glass is typically used where safety and security are the priority.
By far the most common interlayer is polyvinyl butyral (PVB). Ethylene-vinyl acetate (EVA) is also popular; other interlayer materials include cast-in resins, polyurethanes and ionoplast materials.
Where transparent plastic materials, like PVB and EVA, are used as the interlayer, the bond is achieved through the application of heat and pressure in a controlled environment; however, plastic interlayers make cutting difficult. Resin is a more versatile adhesive and allows for the production of curved laminates.
Demanding performance specifications are driving the development of interlayer solutions, some of which fail to offer adequate levels of adhesion.
Manufacturers of proprietary interlayers, such as ionomer-based ionoplast, claim improved performance for especially demanding applications. PVB, however, remains the popular option.
As a hygroscopic material, PVB absorbs moisture and can turn cloudy as a result. Poor storage of PVB can lead to it having an increased moisture content prior to use, while good edge sealing of the glazed unit stops moisture getting to the interlayer; either can risk delamination. Delamination may also occur if distortion in the two glass panes is poorly matched and introduces stresses in the interlayer.
It is important to understand when specifying glass for use in rooflight systems, that the combination of interlayer and glass panes that make up the complete section is critical in achieving your desired performance.
Laminated glass is two or more sheets of glass bonded together with a plastic interlayer, this interlayer holds the glass together and will be retained in the frame in the instance that either or both of the glass sheets should break. It is, therefore, a safety glass and can be used in overhead glazing.
Annealed glass is not as strong as toughened glass and is susceptible to thermal fracture. This is caused when there is a significant temperature difference within the same piece of glass and is likely to occur where adjacent structure or trees, for instance, could cast a shadow across the glass with part of it in sunshine and part in shade.
It can also be caused by other finishes being located close to the underside of the glass where heat coming in through the glass is reflected back to the underside. This can be caused by wide upstands or the fitting of blinds in close proximity. A rooflight with an annealed laminated inner pane would be classified as non-fragile.
Heat strengthened laminated glass is considered the most suitable option for most general use glass rooflights. It is similar to annealed laminated glass, except the sheets of glass that are laminated together have been heat strengthened. This glass is twice the strength of annealed glass and is resistant to thermal heat stress cracking and does not suffer from the very small risk of Nickel Sulphide inclusions that may affect some toughened glass.
Heat strengthened laminated glass is a more expensive option, but it offers one of the broadest specifications for overhead glazing, as it is considered a safety glass which will be retained in the frame if broken and is not susceptible to thermal heat stress cracking. A rooflight with a heat strengthened laminated inner pane would be classified as non-fragile.
Toughened laminated glass is similar to annealed laminated glass except the sheets of glass that are laminated together have been toughened and heat soak tested.
This glass has all the benefits of toughened glass but without the risk of pieces of glass falling from the roof light if one or both of the sheets of glass in the laminate should break. It is not susceptible to thermal heat stress cracking. A rooflight with a toughened laminated inner pane would be classified as non-fragile.
Contact:
Glazing Vision Ltd,
Sawmills Road,
Diss,
IP22 4RG
01379 658 300
Visit the Glazing Vision website
The latest Builders Merchant Building Index (BMBI) report shows builders’ merchants’ value sales in October were up +1.2% compared to the same month last year.
Posted in Articles, Bathrooms & Toilets, Bricks & Blocks, Building Associations & Institutes, Building Industry News, Building Products & Structures, Building Services, Building Systems, Civil Engineering, Cladding, Concrete, Cement, Admixtures, Drainage, Drainage Services, Floors, Garden, Hand Tools, Hard Landscaping & Walkways, Health & Safety, Heating Systems, Controls and Management, Heating, Ventilation and Air Conditioning - HVAC, Information Technology, Interior Design & Construction, Interiors, Landscaping, news, Paints, Paints, Coatings & Finishes, Pipes, Pipes & Fittings, Plant, Equipment and Hire, Plumbing, Power Tools, Publications, Research & Materials Testing, Restoration & Refurbishment, Retrofit & Renovation, Site Preparation, Sustainability & Energy Efficiency, Timber Buildings and Timber Products, Walls, Waste Management & RecyclingKids’ Village is delighted to have partnered with GEZE UK as their 2025 charity of the year – find out more via the article…
Posted in Access Control & Door Entry Systems, Architectural Ironmongery, Articles, Building Industry Events, Building Industry News, Building Products & Structures, Building Services, Charity work, Doors, Facility Management & Building Services, Health & Safety, Restoration & Refurbishment, Retrofit & Renovation, Security and Fire Protection, WindowsThe Encon Group, the leading independent distributor of building materials, is pleased to announce that it has been awarded Silver membership of The 5% Club by the 2024/25 Employer Audit Scheme.
Posted in Articles, Awards, Bricks & Blocks, Building Associations & Institutes, Building Industry Events, Building Industry News, Building Products & Structures, Building Regulations & Accreditations, Building Services, Building Systems, Civil Engineering, Cladding, Concrete, Cement, Admixtures, Facades, Hard Landscaping & Walkways, Health & Safety, Insulation, Landscaping, Plant, Equipment and Hire, Recruitment, Restoration & Refurbishment, Retrofit & Renovation, Site Preparation, Training, WallsLocated in Charlton, South London, SWA member West Leigh was established during the Blitz, in 1943. During the destruction in London, the company helped in repairing windows and facades that had been damaged by bombings throughout the city.
Posted in Articles, Building Associations & Institutes, Building Industry News, Building Products & Structures, Building Services, Building Systems, Case Studies, Facades, Glass, Glazing, Restoration & Refurbishment, Retrofit & Renovation, Steel and Structural Frames, Walls, Windows