Contour Heating addresses concerns that LST radiators are not particularly efficient and discusses the benefits of its LST radiators.
There is a growing concern about the efficiency of LST radiators, as many spaces require maximum levels of cost-effectiveness while maintaining the best standards. If there is an excessive amount of lost heat or a serious inefficiency around LST radiators it can result in larger heating bills as temperatures are cranked up to reclaim what is lost through the brickwork.
In schools and hospitals, tight budgets mean that there must be serious efforts made to ensure that heating
standards are not draining the finances that could be better placed elsewhere.
Some radiator covers are efficient because they offer as little as a 5% reduction in their heat output,
however, they aren’t always suitable for places catering to vulnerable people as they have many free areas
that allow heat to flow into the room. These areas become risk points for items being pushed through, fingers being caught and the potential for them to be used a ligature point.
Therefore, LST radiators should be designed to maintain safety as well as low surface temperatures and
efficiency.
One of the primary benefits of Contour LST radiators is that they can be cleaned much faster and on a
lower budget than a traditional LST. Using RotaRad valves, Contour LST radiators are designed so that they can be accessed and cleaned by just one person in ten minutes. The benefits of this are that the LST radiators are cleaned faster and require less people-power – saving money that can be put back into the facility to be spent on more equipment or staff.
According to BestHeating, around 45% of heat is retained using the proper insulation on a radiator cover. In order to ensure that the heat generated by the LST radiator isn’t lost into the brickwork or the walls behind them, Contour LST radiator covers are coated on the interior with Kingspan foam.
Kingspan works by reflecting the heat that would have otherwise been lost back out into the room. This
prevents loss of heat that would have occurred without it and gives a better heat output.
Contour can be contacted at;
The Mansions
43 Broadway
Shifnal
TF11 8BB
Tel: 01952 290 498
Email: [email protected]
Alex Tremlett, Insight Data’s Commercial Director, discusses the challenges for construction firms in 2025 and shares six strategies for success…
Posted in Articles, Building Industry News, Building Services, Information Technology, news, Research & Materials TestingIncoming governments, especially those with significant mandates, inevitably come into power on a tidal wave of optimism coupled with hope that ‘Things can only get better’. Andrew Scott, MD of construction-focused, full-service agency Purplex, talks…
Posted in Articles, Building Industry News, Building Services, Information Technology, news, Posts, Research & Materials TestingPop Up Power Supplies has installed 13 new electricity units at The Hepworth Wakefield – read more in this article…
Posted in Articles, Building Industry News, Building Products & Structures, Building Services, Case Studies, Civil Engineering, Facility Management & Building Services, Garden, Hard Landscaping & Walkways, Landscaping, Posts, Restoration & Refurbishment, Retrofit & RenovationUK-based OPT Services has unveiled SlimLine™ Capping, a groundbreaking fibre cable protection solution that promises to deliver significant environmental and installation advantages to the fibre optic industry.
Posted in Articles, Building Industry News, Building Products & Structures, Building Services, Facility Management & Building Services, Information Technology, Innovations & New Products, Sustainability & Energy Efficiency