After the launch of Climate Emergency Design Guide from the London Energy Transformation Initiative (LETI), REHAU is highlighting the ongoing initiatives in uPVC technology which will effectively contribute to a number of the guide’s action points.
With a clear sustainability agenda at its core, REHAU has forged a business that develops energy-efficient solutions with little environmental impact, demonstrated through robust lifecycle assessments and investment into a subsidiary window recycling company.
Martin Hitchin, Chief Executive at REHAU, commented: “The LETI’s call to action to design climate-friendly buildings is one we have taken seriously for many years.
“We are a polymer business and passionately believe in the value this material brings to the built environment. And, while the media attention commanded by the world’s single-use plastic crisis is certainly warranted, it is imperative that we continue to make the distinction between components used in our daily lives versus those integral to the foundations of our built environment.
“We have always taken lifecycle assessments seriously at REHAU and as a result our environmental impact is proportionately lower than that of raw materials.
“This is due to high energy costs demanded for production and extraction of raw materials, as well as logistical considerations relating to transport and fuel costs.
“For example, while the merits of uPVC windows have long been acknowledged, the circular economy of such products is also crucial in the context of climate change.
“This is why we have implemented a closed material cycle, conserved natural resources and reduced CO2 emissions, with the percentage of profiles produced using recycled material rising from 25% to over 40% since 2014, and set to increase to 50% next year.
“In summary, we at REHAU are committed to relieving the burden on our environment, and thoroughly agree with the message sent by the LETI Climate Emergency Design Guide. It is important that developers, landowners, designers, policymakers, and the wider supply chain are fully aware of the value that uPVC can bring when applied responsibly.”
Contact:
REHAU
Hill Court,
Walford,
Ross on Wye,
Herefordshire,
HR9 5QN
Email address: [email protected]
Tel: 01989 72600
The MCRMA, the industry association dedicated to the metal cladding and roofing sector, is to hold a members’ technical conference in September.
Posted in Aluminium Products, Articles, Building Associations & Institutes, Building Industry Events, Building Industry News, Building Products & Structures, Building Systems, Cladding, Curtain Walling, Exhibitions and Conferences, Facades, Restoration & Refurbishment, Retrofit & Renovation, Roofs, Seminars, Steel and Structural Frames, WallsExperienced ventilation expert Tom Hemming has been appointed by Vortice as National Sales Manager for Electrical Wholesale and Merchants.
Posted in Air Conditioning, Articles, Building Industry News, Building Products & Structures, Building Services, Facility Management & Building Services, Heating, Ventilation and Air Conditioning - HVAC, Recruitment, Retrofit & RenovationSWA member Govette Windows has been manufacturing steel windows, doors (and more) from its factory for almost 30 years.
Posted in Articles, Building Associations & Institutes, Building Industry News, Building Products & Structures, Building Systems, Doors, Glass, Glazing, Restoration & Refurbishment, Retrofit & Renovation, Steel and Structural Frames, WindowsRoof Maker, the manufacturer of world-class rooflights, has given hard to reach spaces a lease of life following the launch of a new electric-powered rooflight.
Posted in Aluminium Products, Articles, Building Industry News, Building Products & Structures, Building Services, Building Systems, Glass, Glazing, Innovations & New Products, Lighting, Restoration & Refurbishment, Retrofit & Renovation, Roofs, Windows