SWA: Aftercare and maintenance of steel windows

  • 25 Oct 2024

The Steel Window Association has developed a series of fact sheets – all are viewable and downloadable here. The following is a synopsis of the aftercare and maintenance fact sheet which has been complied by the industry’s experts.

Simple measures, such as having the metal frame surfaces washed at the same time as the glass is cleaned, and undertaking an annual inspection of working parts, gasket weather seals and joint sealants, will do much to ensure trouble-free performance. This fact sheet gives general guidance on taking care of steel framed windows and doors so that they will continue to give years of satisfactory service.

Where materials are to be procured for renovation or replacement, the recommendations of the manufacturer should always be sought for confirmation of suitability for the specific application.

SURFACE FINISHES – FACTORY APPLIED

Most modern steel window frames have a factory-applied stoved polyester colour coating which should be washed down periodically, at intervals of between three and 12 months, using a mild non-alkaline detergent in warm water, and then rinsed. The finish will then last between 10 and 20 years before a decorative re-coat becomes necessary. 

WEATHERSEALS

The synthetic rubber weatherseals should also be included in periodic maintenance inspections; the most common cause of damage is site applied paint. If paint removal proves impossible, weatherseal replacement can be undertaken, preferably with materials supplied by the original manufacturer.

GLASS REPLACEMENT

The edges of double glass units and single panes must be spaced from the metal frame glazing rebate with setting and location blocks. They must also be carefully separated from the glazing upstand with distance pieces, mastic tapes or pre-formed gaskets.

All windows produced by SWA members in hot rolled steel sections to BS.6510 are protected by the hot dip galvanizing process in accordance with BS EN ISO 1461.

To read the full fact sheet, click here.

For further information on the Steel Window Association, or if you’re interested in becoming a member, visit www.steel-window-association.co.uk

Leave a Reply

Latest news

FLIR Si1-LD Acoustic Imaging Camera for Compressed Air Leak Detection

FLIR, a Teledyne Technologies company, introduces the Si1-LD, an industrial acoustic imaging camera that brings faster and more accurate compressed air leak detection to those operating on a modest condition monitoring budget.

Posted in Acoustics, Noise & Vibration Control, Articles, Building Industry News, Building Products & Structures, Building Services, Facility Management & Building Services, Information Technology, Innovations & New Products, Retrofit & Renovation, Sustainability & Energy Efficiency, Thermal Imaging and Monitors

LIFTEX 2025 Seminar programme announced

Registration has opened for LIFTEX 2025. Now in its 37th year, LIFTEX 2025 is the UK’s only dedicated exhibition for the lift, escalator and access industry and takes place only once every three years.

Posted in Access Control & Door Entry Systems, Accessibility, Articles, Building Industry Events, Building Industry News, Building Products & Structures, Building Regulations & Accreditations, Building Services, Exhibitions and Conferences, Facility Management & Building Services, Health & Safety, Retrofit & Renovation, Security and Fire Protection, Seminars

MCRMA welcomes ArcelorMittal UK to membership

A UK division of the global steelmaking business ArcelorMittal has become the latest new member of the MCRMA, the industry association representing the metal building envelope sector.

Posted in Articles, Building Associations & Institutes, Building Industry News, Building Products & Structures, Building Systems, Cladding, Facades, Posts, Restoration & Refurbishment, Retrofit & Renovation, Roofs, Steel and Structural Frames, Walls