Verging on Perfection: Hambleside Danelaw’s Verg Family

The verge is generally the location on a roof where the tiles end at the gable, this is a potential point of weakness in the weatherproofing of the roof. Hambleside Danelaw produce a variety of solutions to meet the requirements for the securing and weatherproofing of various tile types.

Verge systems are installed to prevent water ingress and resist wind uplift, and mechanically fixed dry verge systems eliminate the need for mortar in both new-build and refurbishment applications.

All of Hambleside Danelaw’s dry verge systems are tested for wind uplift resistance as required and comply with the BS 8612 Standard for dry fixed roofing products.

Danelaw Dry Fix Verge Systems for Tile Roofing

Hambleside Danelaw manufacture five types of interlocking verge systems compatible with a wide array of tile types, which are:

– InVerg® – the unique and patented design in the Verg family is suitable for single and double cambered concrete and clay plain tiles at batten gauges 88mm to 104mm.

– IDV – Hambleside Danelaw’s original interlocking dry verge, which suits most large format single lap concrete tiles between 260 & 355mm batten gauges.

– ThinVerg® – the thin leading edge dry verge system is compatible with all large format concrete thin leading edge tile types, and suitable for use on new build or refurbishment. 

– MidVerg20® – compatible with flat concrete and clay tile types of intermediate size between 200 and 260mm batten gauges.

– MiniVerg® – Designed to suit all single lap interlocking plain tile types between 170mm and 200mm batten gauges.  

All verge units are UV stabilised and available to order in Antique Red, Black, Brown, Slate Grey, and Terracotta. They are complimented by a selection of eaves starter units to suit, batten end clips for nail fixing and ridge end caps for round and angle ridge tiles. Head to Hambleside Danelaw’s compatibility checker for more information on their range of interlocking dry verges.

Danelaw Verges for Slate Roofing

Danelaw also manufacture continuous GRP verges for slate roofing which provide weather protection for new and re-roofing applications or for retro-fit situations.  Requiring no special components at junctions, our continuous verges are manufactured from GRP and come with a 30-year service life guarantee. 

GRP is an incredibly versatile thermoset material, meaning it is generally much more durable and less affected by heat and is more thermally stable than other plastics, so will not warp or buckle in normal operating temperatures.  In addition to this, GRP verges have no scrap value to thieves, meaning your roof can remain secure in more ways than one!

Learn More

Want to learn more about Hambleside Danelaw and its range of pitched roofing components? Get in touch with the team on 01327 701 910.

Visit the website

Hambleside Danelaw Limited
Long March,
Daventry,
Northamptonshire,
N11 4NR,
UK

T: +44 (0) 1327701900
F: +44 (0) 1327701909

Sales and Distribution:
E: [email protected]

Marketing:
E: [email protected]

Technical:
E: [email protected]

Visit Supplier's page