Choose your boiler, installer and fuel wisely to ensure biomass stays ‘green’

  • 15 Jan 2015

Simon Holden from Euroheat responds to the Guardian article:

Success in central Europe

The problems in the UK market, which is still a very young one, come down to the quality of some boilers, the installers that fit them and the fuel they burn – get these three things right and efficiencies of over 90% are certainly achievable, placing biomass as a worthwhile carbon cutting solution.

New RHI fuel legislation set to be bought in this spring should go some way to alleviating fuel issues, but more certainly needs to be done in terms of preventing sub-standard boilers from being installed – at the moment there is no equivalent to MCS for machines over 45kWs.

 

Rather than throwing in the biomass towel, the report should be viewed as a wake-up call – as a sector, we need to up our game to ensure biomass works as a viable and efficient alternative to fossil fuels.

Getting the most out of biomass boilers

At Euroheat, we’re confident in the efficiency of our boilers; the technology’s cutting edge, we only allow approved installers to fit our machines, with Euroheat experts handling nearly all commissioning. We also make sure customers choose good quality fuel with a moisture content of 20% or less – key to getting the most out of biomass boilers.

A sense of proportion is also important – a DECC spokeswoman said that the study’s sample had been small and ñmore work now needs to be done to fully assess the performance of biomass boiler systems and installer competencyî. I for one, look forward to further research; constant review and improvement is key to helping renewables become a common fixture in our homes and businesses.

In order for the UK to move away from its reliance on fossil fuels, constructive criticism of renewable technologies and how they’re delivered is welcome and imperative. Negativity that results in consumers and installers ‘giving up’ on going green is extremely harmful however; balance and proportion is essential.

SEND YOUR COMMENTS TO BUILDINGTALK

READ MORE HOT TOPICS

Euroheat (HBS)
Bishops Frome 
Worcestershire 
UK
WR6 5AY
Tel: +44 1885 491100 
Fax: +44 1885 491101
Web: www.euroheat.co.uk
Email: [email protected]

Leave a Reply

Latest news

MCRMA
Vortice
SWA

A focus on SWA member - Govette Windows

SWA member Govette Windows has been manufacturing steel windows, doors (and more) from its factory for almost 30 years.

Posted in Articles, Building Associations & Institutes, Building Industry News, Building Products & Structures, Building Systems, Doors, Glass, Glazing, Restoration & Refurbishment, Retrofit & Renovation, Steel and Structural Frames, Windows

The sky’s the limit with the introduction of Roof Maker’s one-click automatic rooflight

Roof Maker, the manufacturer of world-class rooflights, has given hard to reach spaces a lease of life following the launch of a new electric-powered rooflight.

Posted in Aluminium Products, Articles, Building Industry News, Building Products & Structures, Building Services, Building Systems, Glass, Glazing, Innovations & New Products, Lighting, Restoration & Refurbishment, Retrofit & Renovation, Roofs, Windows