Up to 30% of global annual greenhouse gas emissions come from the building sector, making it a big factor in mitigating climate change. One solution to the problem is building with wood, as wood is the only construction material that stores carbon.
Consequently, wood products have a small carbon footprint during their lifecycle and can be used in practically all buildings to store carbon.
Finding new ways of capturing carbon from the atmosphere is one way to mitigate climate change, and the construction sector can support these positive developments by using wooden construction materials that capture carbon for their entire life span.
Matti Kuittinen, architect and researcher from Aalto University explains that the dry mass of wood is 50% carbon, and this carbon is taken away from the atmosphere and thus does not contribute to the greenhouse effect.
Wood-based materials can be used in most parts of any building to capture carbon from the atmosphere. Moreover, the largest potential for storing carbon can be achieved in external walls, intermediate floors and roof structures.
For example, a passive house was designed for a cold climate with two alternative construction material combinations: wood frame with wood-fibre insulation and an aircrew frame with EPS insulation.
Kuittinen added that although both options of wood gave the buildings’ shell the same level of energy efficiency, producing the wooden alternative caused approximately 40% less CO2 emissions. In addition, the amount of atmospheric carbon stored in its wood frame was almost four times as much as in the alternative.
However, it is important to ensure that the carbon storage is as long-term as possible and long service life requires good design, moisture safety during construction and good maintenance.
Furthermore, the wooden parts can be recycled into other products when they are no lingers used in buildings. Therefore, the atmospheric carbon stays locked away. Wood material can be used for bioenergy products after a cascade of recycling.
English Spirit Distillery has used an extensive package of Altro products front and back of house, in their new visitor centre café, shop and viewing area for the working distillery.
Posted in Articles, Bathrooms, Bedrooms & Washrooms, Building Industry News, Building Products & Structures, Building Systems, Case Studies, Floors, Interior Design & Construction, Interiors, Kitchens, Restoration & Refurbishment, Retrofit & Renovation, Timber Buildings and Timber Products, WallsAbloy UK has supplied The Safety Letterbox Company Ltd with a bespoke Sentry CL811 Camlock for use in its Secure Information Boxes, assisting life safety and complying with new regulations and legislation for high rise buildings.
Posted in Access Control & Door Entry Systems, Architectural Ironmongery, Articles, Building Industry News, Building Products & Structures, Building Regulations & Accreditations, Building Services, Case Studies, Facility Management & Building Services, Health & Safety, Posts, Restoration & Refurbishment, Retrofit & Renovation, Security and Fire ProtectionSituated at the northern edge of a newly developed retail park near Bristol, the Abbey Wood Travelodge was conceived as part of the company’s new Budget-Luxe line of hotels – it features CUPACLAD, from CUPA PIZARRAS.
Posted in Articles, Building Industry News, Building Products & Structures, Building Systems, Case Studies, Cladding, Concrete, Cement, Admixtures, Facades, Posts, Restoration & Refurbishment, Retrofit & Renovation, WallsOrigin’s latest investment is set to redefine industry standards as it launches its own in-house powder coating facility.
Posted in Aluminium Products, Articles, Building Industry News, Building Products & Structures, Building Systems, Doors, Glass, Glazing, Innovations & New Products, Paints, Coatings & Finishes, Restoration & Refurbishment, Retrofit & Renovation, Site Preparation, Windows