Label Apeel printing factory

Durable Sikafloor system installed at Leicester printing factory

  • 17 May 2016

A hard-wearing and fast-applied flooring system from Sika has been fitted at the premises of a Leicester-based printing company, to provide long-term performance and durability with minimal disruption during installation.

Label Apeel printing factory

Sika’s flooring systems are designed to meet all the industry requirements for mechanical and chemical resistance, impermeability and fire resistance.

Label Apeel contacted Central Flooring Services after purchasing an old hosiery factory in Thurmaston, Leicestershire. The printing company found that the production floors were pitted, in poor condition and required a complete overhaul before they could be used. 

Central Flooring Services recommended a high performance Sika flooring solution that would meet the requirements for durability with the floors subjected to the daily impact of heavy machinery, forklift trucks and footfall.

Label Apeel also required a system which could be installed in just two weeks.

The system consisted of a Sikafloor 161 primer, which was applied after shot blasting the existing surface, in addition to more than 1,700m2 of the fast-setting Sikafloor Level 30 mortar to level the surface of the factory floor.

It was completed with two coats of Sikafloor 264 to create an aesthetically appealing finish prior to the reinstatement of expansion joints.

Sika Limited
Watchmead
Welwyn Garden City
Hertfordshire
AL7 1BQ
Telephone: +44 (0) 1707 394444

Visit Sika's website

Leave a Reply

Latest news

Stannah

Network Rail selects Stannah once again as its lift service partner

Stannah is delighted to announce its successful bid for the Network Rail lift and escalator tender. Stannah has worked with Network Rail for over two decades and has now won a new five-year contract.

Posted in Accessibility, Articles, Building Industry News, Building Products & Structures, Building Services, Case Studies, Facility Management & Building Services, Health & Safety, Lifts, Restoration & Refurbishment, Retrofit & Renovation

Renson
MCRMA

MCRMA welcomes FK Group as new member

One of the UK’s largest building envelope contractors has become the latest member of the MCRMA, the association which represents the metal roofing and facades sector.

Posted in Aluminium Products, Articles, Building Associations & Institutes, Building Industry News, Building Products & Structures, Building Services, Building Systems, Cladding, Facades, Posts, Restoration & Refurbishment, Retrofit & Renovation, Roofs, Steel and Structural Frames, Walls

George Barnsdale