Contour Heating discusses how its anti-ligature products can help to minimise the risk of suicide and self-harm in mental health establishments.
Every Trust in a given Local Authority will have its own anti-ligature policies. They will all be based on official NHS guidelines regarding the care and wellbeing of patients in mental health facilities.
This blog aims to draw together all the official guidance surrounding the eduction of ligature risks so that it is in one place. This should hopefully provide you with the clarity and knowledge required to make the most informed decisions when specifying and choosing products.
This is a general overview, applicable to every workplace environment. Employers should seek to ensure that the health safety of their employees and persons not in their employment. This legislation is shared by both The Health and Safety at Work Act (1974) and The Management of Health and Safety of Work Regulations (1999).
Common Law also adds that if employees and others’ care is not reasonable, employers may be sued by anyone who suffers a loss, for damages.
Although this legal framework does not address ligature risks directly, it’s important to understand the responsibilities employers’ have in ensuring the safety and wellbeing of employees and those in their care.
It is not possible for all ligature points to be identified and/or removed. We simply haven’t come up with a technical solution that will completely eliminate all ligature risks. Therefore, we aim to consciously state that our products do not eliminate the risk altogether. Instead, we say they reduce the risk to a standard that is of a high-quality.
According to The Camden and Islington NHS Trust (2017), a judgment must be made about the likelihood of something being used as a ligature point and the control measures required for that area. This is where specifiers and architects need to assess the design of their space and choose products aimed at limiting ligature risks.
The Care Quality Commission (2015) highlights that a risk posed by a ligature point is greater if:
1. It is in a private room that service users spend time in without direct supervision by staff.
2. It is in an area/ward used by high-risk patients.
3. The ligature point is between 0.7 metres and 4 metres from the ground.
4. The ward is designed poorly, with too few nurses on duty.
As an architect or specifier, we recommend that these risks are taken into consideration during the design process of any new projects.
As a ward manager, Contour recommends that you assess your current ligature risks in high-risk areas and consider any appliances/furniture that may need replacing or upgrading.
We also suggest that you assess those ligature risks that need to remain, as removing them may create a greater risk to the patient; for example, grab rails for elderly patients at high risk of falls.
The Care Quality Commission will pay close attention to the areas highlighted above during their inspection, so it’s worth assessing ligature risks in those four main areas.
The Camden and Islington NHS Trust (2017) recommends that you undertake a ligature risk audit every six months. In the event of an incident or near miss occurring, an audit should be taken following the incident.
The Standards for Inpatient Mental Health Services (2017) highlights the differing ward types and recommend certain measures to be put in place when managing ligature risks.
Potential ligature points should be managed as part of an individual and ward risk assessment.
There should be a system in place for staff to report any ligature points, and a prompt follow-up action if any are identified.
Furnishings should minimise the potential for fixtures and fittings to be used as weapons, barriers of ligature points.
Bathroom and shower areas should be free of ligature points. There should also be a formal procedure in place to assess any clinical environment for ligature risks at least every six months.
According to the Department of Health High Secure Building Design Guide, interiors, furniture, and fittings should be designed to ensure that they minimise the possibility for use for self-harm or as a ligature.
Finally, assessment rooms in psychiatric facilities must have no ligature points.
Contour can be contacted at;
The Mansions
43 Broadway
Shifnal
TF11 8BB
Tel: 01952 290 498
Email: [email protected]
Pop Up Power Supplies has installed 13 new electricity units at The Hepworth Wakefield – read more in this article…
Posted in Articles, Building Industry News, Building Products & Structures, Building Services, Case Studies, Civil Engineering, Facility Management & Building Services, Garden, Hard Landscaping & Walkways, Landscaping, Posts, Restoration & Refurbishment, Retrofit & RenovationUK-based OPT Services has unveiled SlimLine™ Capping, a groundbreaking fibre cable protection solution that promises to deliver significant environmental and installation advantages to the fibre optic industry.
Posted in Articles, Building Industry News, Building Products & Structures, Building Services, Facility Management & Building Services, Information Technology, Innovations & New Products, Sustainability & Energy EfficiencyParis balconies, with their timeless charm and practicality, are becoming something of an architectural staple in urban and rural environments, as CRL explains here…
Posted in Articles, Balustrades and Guardrails, Building Industry News, Building Products & Structures, Case Studies, Garden, Glass, Glass Projects, Restoration & Refurbishment, Retrofit & RenovationEnglish Spirit Distillery has used an extensive package of Altro products front and back of house, in their new visitor centre café, shop and viewing area for the working distillery.
Posted in Articles, Bathrooms, Bedrooms & Washrooms, Building Industry News, Building Products & Structures, Building Systems, Case Studies, Floors, Interior Design & Construction, Interiors, Kitchens, Restoration & Refurbishment, Retrofit & Renovation, Timber Buildings and Timber Products, Walls