“There are a variety of manual and electrical options available for escape door hardware but as with all products, its essential to consider the end user and the environment in which devices are to be placed. The primary purpose of any door on an escape route is for it be readily openable, and the type of premises and its level of occupancy will define whether what type of panic or emergency exit hardware to use.
– Panic exit devices to BS EN 1125: These devices are intended primarily for buildings where the public is likely to be present and a panic situation could arise if the building must be evacuated quickly. For this reason, the devices are designed to operate by body pressure alone and require no knowledge of their operation to enable safe and effective evacuation of a building.
– Emergency exit devices to BS EN 179: These devices are intended for escape from buildings where the public is unlikely to be present, and where the staff have been trained in emergency procedures and in the use of the specific emergency exit devices fitted. For this reason, panic situations are considered unlikely, and these devices are therefore permitted to have higher operating forces and do not need to release by body pressure alone.
In most cases a mechanical panic device will be the first choice. However, it’s worth considering if the door is to be used for other access requirements and whether users might have accessibility issues. For example, in a hospital or care home, motorised touch bars could provide additional functionality and ease-of-use.
Safety and security will also be a factor. All panic and emergency exit devices provide a level of security against intrusion, but where there is a need for increased security, additional measures can be taken to enhance it without compromising the ability of people to escape during an emergency.
It is essential to liaise with local building and fire authorities to determine building occupancy and undertake risk assessment if such measures are deemed necessary. These can include audible alarms, door monitoring devices and CCTV.
Motorised devices are often used on escape doors which require external access control to restrict who enters a building such as an entrance to a school or college. They are also suitable for use on automatic doors.
Motorised touch bars also provide convenience and enable efficient building management. They can be linked to a variety of access control systems which use swipe card, digital keypad or proximity reader to allow controlled access from outside. They are ideal for large commercial or public buildings and with the addition of a microswitch they can be linked into an estate management off-site control to provide door monitoring.”
EcoOnline, a leading technology provider for EHS, ESG, and Chemical Safety, is pleased to announce that Keltbray Infrastructure Services has selected EcoOnline’s Sypol solution to support their COSHH compliance management.
Posted in Articles, Building Industry News, Building Products & Structures, Building Regulations & Accreditations, Building Services, Civil Engineering, Concrete, Cement, Admixtures, Facility Management & Building Services, Hard Landscaping & Walkways, Health & Safety, Landscaping, Retrofit & Renovation, Site PreparationIn any construction project, meticulous recording and management of door hardware is critical — although often prone to human error. ASSA ABLOY has more…
Posted in Access Control & Door Entry Systems, Architectural Ironmongery, Articles, BIM, Infrastructure & CAD Software, Building Industry News, Building Products & Structures, Building Services, Doors, Facility Management & Building Services, Health & Safety, Information Technology, Restoration & Refurbishment, Retrofit & Renovation, Security and Fire ProtectionWhen Klick Technology needed the perfect bespoke solid surface for a pathology laboratory design brief, they knew exactly who to turn to – Velstone.
Posted in Articles, Building Industry News, Building Products & Structures, Case Studies, Interior Design & Construction, Interiors, Restoration & Refurbishment, Retrofit & RenovationGilberts has risen to the challenge of ensuring the balance of ventilation and safety with the development of its fire rated connection box (plenum).
Posted in Air Conditioning, Articles, Building Industry News, Building Products & Structures, Building Services, Facility Management & Building Services, Health & Safety, Heating, Ventilation and Air Conditioning - HVAC, Innovations & New Products, Restoration & Refurbishment, Retrofit & Renovation, Security and Fire Protection