Fire Fighting Enterprises (FFE) has launched a range of anti-condensation heaters for its optical beam smoke detectors and reflectors.
The Fireray detector range has been developed to provide wide area smoke detection where it is impractical to use traditional point-type detectors.
The smoke detector is also ideal for large indoor spaces with high ceilings, including warehouses, sports arenas, factories and shopping malls.
There are two general types of detector: end-to-end, which consists of two detector heads; and reflective, which feature one detector head and a reflective prism.
In areas with lower temperatures, there is a risk of condensation forming on detector lenses and prisms. This can obscure the lens and prism, this reducing the amount of infrared (IR) light reaching the detector.
This has a similar effect to smoke and can lead to unwanted false alarms.
FFE’s anti-condensation heaters have been developed to combat the issue by circulating a current of warm air over the lens, raising its ambient temperature by up to 10°C.
This maintains the lens at an incrementally higher temperature than the surrounding air, reducing the likelihood of condensation forming on the lens.
The prism heater consists of an ultra-slim heating pad which is fitted behind the mounting plate.
As with the detector heater, by maintaining the temperature of the prism above that of the surrounding air, the risk of a false alarm is reduced.
In addition to being a solution to the issue of seasonal cold weather, the heaters can be used year-round on detectors and prisms located in temperature-controlled cold storage areas.
Heaters are available for use with the Fireray 3000, Fireray 5000 and Fireray 50R/100R smoke detector ranges, reducing the environmental impact of condensation and minimising false alarms.
Fire Fighting Enterprises
9 Hunting Gate
Wilbury Way
Hitchin
Hertfordshire
SG4 0TJ
UK
01462 444 740
Visit the Fire Fighting Enterprises website
Alex Tremlett, Insight Data’s Commercial Director, discusses the challenges for construction firms in 2025 and shares six strategies for success…
Posted in Articles, Building Industry News, Building Services, Information Technology, news, Research & Materials TestingIncoming governments, especially those with significant mandates, inevitably come into power on a tidal wave of optimism coupled with hope that ‘Things can only get better’. Andrew Scott, MD of construction-focused, full-service agency Purplex, talks…
Posted in Articles, Building Industry News, Building Services, Information Technology, news, Posts, Research & Materials TestingPop Up Power Supplies has installed 13 new electricity units at The Hepworth Wakefield – read more in this article…
Posted in Articles, Building Industry News, Building Products & Structures, Building Services, Case Studies, Civil Engineering, Facility Management & Building Services, Garden, Hard Landscaping & Walkways, Landscaping, Posts, Restoration & Refurbishment, Retrofit & RenovationUK-based OPT Services has unveiled SlimLine™ Capping, a groundbreaking fibre cable protection solution that promises to deliver significant environmental and installation advantages to the fibre optic industry.
Posted in Articles, Building Industry News, Building Products & Structures, Building Services, Facility Management & Building Services, Information Technology, Innovations & New Products, Sustainability & Energy Efficiency